Search results for query «68»

RAVENOL SCR PAO 68 Screw Kompressorenöl is also specifically designed to significantly extend service life in rotary screw compressors.

RAVENOL SCR PAO 68 Screw Kompressorenöl has excellent resistance to oxi dative breakdown caused by exposure to air at high discharge temperatures it has excellent thermal s tability for reducing carbon deposit formation.

RAVENOL SCR PAO 68 Screw Kompressorenöl shows good p rotection against wear, protects against rust and corrosion. Low volatility reduces oil carry-over i nto the air system. Reduces fluid consumption.

The full benefits of a change to RAVENOL SCR PAO 68 Screw Kompressorenöl will only be realized by minimizing contamination with the previously used oil. Certain makes of compressors do not permit completedraining, so if the drained oil is heavily oxid ized (shown by significant increase in the oil’s total acid number and viscosity), recharging with RAVENOL SCR PAO 68 Screw Kompressorenöl may not result in optimum performance and fluid service life.

RAVENOL SCR PAO 68 Screw Kompressorenöl has excellent oxidation stability, corrosion,deposit contr ol and low volatility and provides up to 8,000 hours of continuous worry-free service for lubricatio n, sealing and effective heat removal for efficient compressor performance.

Application Note:

RAVENOL SCR PAO 68 Screw Kompressorenöl is recommended for use in rotary screw air compressors.

While RAVENOL SCR PAO 68 Screw Kompressorenöl is fully compatible with most mineral and synthetic comp ressor fluids, it should not be mixed or contaminated with fluids containing polyalkylene glycols or silicones.

Characteristics:

• High oxidation stability
• Excellent protection against rust and corrosion.
• Excellent resistance to oxidative breakdown.
• caused by exposure to air at high discharge temperatures
• Higher thermal stability reduces carbon deposit formation
• Improved viscosity index and good low temperature properties
• Good protection against wear
• Protects against rust and corrosion
• Low volatility reduces oil carry-over into the air system
• Reduces fluid consumption

RAVENOL Hydraulikoel HVLP-D 68 is designed with selected base oils with additives to prevent corrosion, wear and friction.

RAVENOL Hydraulikoel HVLP-D 68 is characterized by a good viscosity-temperature behavior, high aging resistance and reliable corrosion protection.

RAVENOL Hydraulikoel HVLP-D 68 also contains detergent and dispersing agents, which always provide for a clean hydraulic system.

These additives dissolve contaminants, hold them in suspension and enabling the cleaning of contaminated hydraulic systems. The functional elements of a hydraulic system thereby remain free of deposits and bonds. This will emulsified penetrating water and ensure trouble-free operation of the hydraulic system.

Application Note

RAVENOL Hydraulikoel HVLP-D 68 is used in hydraulic systems which are exposed to very fluctuating operating temperatures, abrasion, dirt and water.

RAVENOL Hydraulikoel HVLP-D 68 is designed for heavily loaded hydraulic systems of agricultural, forestry and construction machinery and stationary hydraulic systems, e.g. Industrial equipment.

Characteristics

• Reliable corrosion protection even when absorbing moisture
• Good air and water separation capacity, prevention of foam formation
• Excellent wear protection
• Good oxidation stability
• Excellent detergent and dispersing properties
• Neutral behavior against sealing materials
• Very low flow point

RAVENOL Turbinenöl T 68 is based on high quality mineral base oils with agents to increase the corrosion protection and aging resistance.

RAVENOL Turbinenöl T 68 is a universal mineral oil for turbines of especially chosen refined base oils with a natural high viscosity index. So-called “metal deactivators” are added to the turbine oil in addition to the normal additives in order to guarantee the excellent characteristics.

RAVENOL Turbinenöl T 68 is zinc-free due to its formulation.

Application Note

RAVENOL Turbinenöl T 68 is used in fixed gas and steam turbines as well as electrical machines or machines driven by steam turbines like generators, compressors, pumps and transmissions.

RAVENOL Turbinenöl T 68 can also be used for the lubrication of hydraulic systems, compressors, gear transfers and bearings in case of problems of the contamination with water because a high protection against rust and oxidation is requested.

Characteristics

• an excellent thermic and oxidative stability
• an excellent viscosity temperature behaviour
• a high and stable viscosity index
• a very good oxidation stability also at very high temperatures
• a good protection against corrosion of Ferro and non Ferro metals
• an excellent water separation behaviour
• a very good air separation behaviour which excludes foam formation as far as possible
• a low pour pointa good corrosion behaviour
• an excellent water separation behaviour / demulsifying behaviour

RAVENOL Wärmeträgeroel 68 offers high thermal conductivity, combined with high thermal stability and high resistance to oxidation.

RAVENOL Wärmeträgeroel 68 is an excellent heat transfer oil that meets the specified requirements.

Application Note

RAVENOL Wärmeträgeroel 68 is particularly suitable for use in closed heating systems. The maximum flow temperature should not exceed 320°C. The maximum oil film temperature is 350°C. The direct contact of the oil with the ambient air must be avoided, as this would accelerate aging. We recommend cleaning of the entire heat transfer system before each new filling. A non-maintenance justice purified plant achieves no optimum efficiency.

Characteristics

• A very stable and excellent viscosity behavior
• High thermal conductivity
• High oxidation stability
• Protection against corrosion

RAVENOL Bettbahnoel 68 is characterized by good lubricating and sliding properties as well as high tackiness.

RAVENOL Bettbahnoel 68 is formulated with mineral base oils and contains additives and corrosion inhibitors to prevent rust formation and stains on slide ways and track surfaces.

RAVENOL Bettbahnoel 68 is compatible with most of drilling-, cutting or grinding emulsions. The lubricant film of the slide way oil is not washed off.

Application Note

RAVENOL Bettbahnoel 68 can be used for all types of lubrication systems such as pressure, circulating or central lubrication. If necessary, it can be applied manually. It can also be used for lubricating bearings and gear boxes.

Characteristics

• Very good stick-slip characteristics
• High tackiness
• Good corrosion protection, no rust and stain formation
• Resistance to aqueous metalworking fluids
• Good demulsification

Application Note

RAVENOL Screw Kompressorenöl SCR 68 is used in compressors.

Characteristics

• a high performance level
• a very good viscosity temperature behaviour
• a high aging resistant
• an excellent corrosion protection
• a solid corrosion protection
• neutrality of sealing materials

RAVENOL ODL 68 Druckluftoel bonds condensed water, has an excellent corrosion protection, wear protection and an extraordinary pressure absorption capacity, a good adhesive power and high aging resistance. Easily conveying- and spray ability, economy consumption. No deposits caused by cleaning effects. Full power of impact.

Application Note

RAVENOL ODL 68 Druckluftoel is specially suitable for pneumatic tools with sound-absorbing-case, for lubrication of rock drills, road breaker, chipping hammer and spade hammer, ram machines and other pneumatic aggregates. Application by pre-switch-lubricator according to working instructions or usable directly in the air pipe. Please follow the manufacturer´s instructions.

Characteristics

• a high performance level
• a very good viscosity temperature behaviour
• a high aging resistant
• an excellent corrosion protection
• a solid corrosion protection
• neutrality of sealing materials

RAVENOL Kompressorenoel PAO VDL 68 contains additives, which ensure an excellent wear protection and protects against residue and corrosion (both steel and non-ferrous metal). Most compressors have to work under high temperature so that the used oil has to have a good aging resistance but also a low residue building.

In addition RAVENOL Kompressorenoel PAO VDL 68 conforms to its ISO VG Class and shows a remarkable low evaporative behavior an outstanding demulsifying power as well as excellent air separation ability. It ensures certain lubrication not only in the high temperature range but also in cold condition of the compressor to reach a wear minimisation. By the use of selected and matched additives the tendency of coking and flammable residues is minimized.

Application Note

RAVENOL Kompressorenoel PAO VDL 68 is recommended for all compressors especially in rotary scew air compressors.

Characteristics

• High oxidation stability.
• Excellent protection against rust and corrosion.
• Best wear protection. Keeps compressor components free of sludge and varnish to ensure trouble free operation and lower maintenance costs on fluid change-out.
• Very low evaporative behavior and an outstanding demulsifying power.
• Excellent air separation ability.
• Better resistance to oxidative breakdown
• Extends oil change intervals up to 8.000 hours service in rotary screw compressors and 1.000 hours service in rotary vane compressors.
• Improves compressor operating efficiency, lower energy consumption costs by reducing of oil thickening.

is a special ageing-resistant-lubricating oils offering minimal coking based on high-quality age-resistant base oils with ash less additives to improve corrosion protection and ageing stability and meets the high requirements of DIN 51 506.

RAVENOL Kompressorenoel VDL 68 has a good adhesion, is water repellent and wear reducing. As many compressors operate at high temperatures, the oil should have good aging resistance at very low residue formation.

RAVENOL Kompressorenoel VDL 68 provides a secure lubrication not only in the upper temperature range, also in the cold state of the compressor to achieve a reduction of wear. By selected and coordinated additive composition the tendency to coking and the formation of flammable residues is minimized.

Application Note

RAVENOL Kompressorenoel VDL 68 can be used in stationary and mobile compressors with discharge temperatures up to 220°C.

RAVENOL Kompressorenoel VDL 68 can also be used for lubrication of engines and diesel engines where the manufacturer does not stipulate any HD motor oil.

RAVENOL Kompressorenoel VDL 68 is not recommended for ATLAS COPCA GA xx series compressors.

Exceeds the requirements for VBL- and VCL-Oils.

Characteristics

• Ashless active substances
• Excellent aging resistance
• Reliable wear protection
• Excellent viscosity-temperature behavior
• Very good cold starting properties
• Low coking tendency
• Neutral towards sealing materials

is a zinc and ash-free compounded oil based phosphorous and sulfur intended especially for use in the metal industry. Excellent results were achieved in the Timken test. Through the addition of selected ingredients,

RAVENOL Hydraulikoel TS AF 68

has excellent wear protection, good oxidation stability and has a long service life even under extreme conditions. Compatibility with sealants is neutral. Furthermore, the additives provide corrosion protection and prevent foaming.

RAVENOL Hydraulikoel TS AF 68

exceeds the requirements of DIN 51 524 part 2 for HLP hydraulic oils.

Application Note

RAVENOL Hydraulikoel TS AF 6

is for use as a hydraulic fluid in the metal industry, if zinc and ash-free hydraulic oil and the specification DIN 51 524, Part 2 is required.

Characteristics

• High level of performance
• Good oxidation stability
• High resistance to aging
• High wear protection
• High corrosion protection
• Neutral towards sealing materials
• No foaming

Compared with products of vegetable triglyceride base, RAVENOL BIO-Hydraulikoel HEES 68 has much better high temperature oxidation stability.

Application Note

RAVENOL BIO-Hydraulikoel HEES 68 is used wherever there is the danger of hydraulic fluid leaking into the ground or waste water. This includes all equipment operating in or near areas of water purification or water protection or near surface water, such as e.g. sewage treatment plants, dredging ships and floating dredges, lock hydraulics and river weirs, pipe and tunnel diving machines, - hydraulic aggregates in forests and on plains, earth moving machines in water collecting areas, forestry machines.

RAVENOL Hydraulikoel HLP-D 68 is designed with selected base oils with additives to prevent corrosion, wear and friction.

RAVENOL Hydraulikoel HLP-D 68 also contains detergent and dispersing agents, which always provide for a clean hydraulic system. These additives dissolve contaminants, hold them in suspension and enabling the cleaning of contaminated hydraulic systems. The functional elements of a hydraulic system thereby remain free of deposits and bonds. This will emulsified penetrating water and ensure trouble-free operation of the hydraulic system.

Application Note

RAVENOL Hydraulikoel HLP-D 68 is for use in agriculture hydraulic systems, construction machinery, cement factories, foundries, and electro-plate clutches. It can also be used as functional test oil, inlet oil for aggregates and machinery, textile machinery and machine tools.

Characteristics

• High aging resistance and high corrosion protection
• Good air release
• Excellent wear protection and proper conduct foam
• Very good viscosity-temperature behaviour
• neutral behaviour towards sealing materials
• Extremely good detergent and dispersant characteristics
• Excellent corrosion protection even at the ingress of wetness

Application Note

RAVENOL Hydraulikoel TSX 68 (HVLP) is suitable for heavy loaded hydraulic machines of the industry, for earth moving machines and agricultural machines. Preferred use in case of great variations of the operation temperature. No use in case of silver and/or silver-coated components in the hydraulic machines.

Characteristics

• A high and stable viscosity index
• An excellent corrosion protection
• An excellent protection against wear
• A very good air and water separation behaviour to prevent foam formation
• Neutral behaviour towards sealing of plastics
• A very low pour point

RAVENOL Getriebeoel CLP 68 has a low pour point and therefore a very good cold behaviour.

Application Note:

RAVENOL Getriebeoel CLP 68 can be used as a lubricant in nearly all industrial gear drives due to its good stress and/or impac t characteristics.

Characteristics:

• A very good, stable high-pressure impact capacity
• Resistant characteristics at high temperatures
• A good rust and corrosion impeding effect
• Excellent wear protection
• Very good anti-foaming characteristics
• A low pour point
• Very good cold behaviour

Application Note

RAVENOL Vakuumpumpenoel ISO VG 68 is suitable for the lubrication of vacuum pumps (rotary vane pumps, diffusion pumps, turbo pumps), where mineral oils are required, as well as for mist lubrication and crankcase.

RAVENOL Vakuumpumpenoel ISO VG 68 oil pumps can be used very well for the lubrication of crankcases. This vacuum pump oil should not be used in systems with silver or silver alloys.

Characteristics

• High performance level
• Very good viscosity-temperature behavior
• High resistance to aging
• Excellent wear protection
• Reliable corrosion protection
• Very good oxidation stability
• Very good demulsification
• Excellent air release, which largely eliminates foam formation
• Neutral from over plastic seals
• Low pour point

RAVENOL Hydraulikoel TS 68 (HLP) with efficient additives offers an excellent corrosion protection even under extreme loads. The behaviour of sealing materials is neutral.

RAVENOL Hydraulikoel TS 68 (HLP) is characterised by good viscosity temperature behaviour, a high aging resistant and a solid corrosion protection.

Application Note

RAVENOL Hydraulikoel TS 68 (HLP) is for universally use in all hydraulic systems.

RAVENOL Hydraulikoel TS 68 (HLP) is recommended in high performance hydraulic systems with high pressure pumps of all types, in sensitive control systems.

RAVENOL Hydraulikoel TS 68 (HLP) is used for hydraulic systems in agriculture, to supply small gearboxes and for use in circulating systems.

Characteristics

• a high performance level
• a very good viscosity temperature behaviour
• a high aging resistant
• an excellent corrosion protection
• a solid corrosion protection
• neutrality of sealing materials