Search by VIN, make, model, vehicle type, unit name, or by article number of any oil:
RAVENOL Racing Brake Fluid R325+ is an ideal brake fluid for motor sports (car and motorbike racing) due to its very high dry and wet boiling point. The braking system is more responsive even under extreme conditions. Please always observe the vehicle manufacturers specifications.
Equivalent: 779152 BRP Racing Brake Fluid 0,473L.
- Available packaging
- Product parameters
DOT 5.1
RAVENOL Racing Brake Fluid R325+ is an ideal brake fluid for motor sports (car and motorbike racing) due to its very high dry and wet boiling point. The braking system is more responsive even under extreme conditions. Please always observe the vehicle manufacturers specifications.
Application Note
To achieve optimum results the braking system should be freshly filled with RAVENOL Racing Brake Fluid R325+ before each race. In particular when the brakes are inordinately hot or racing under tropical conditions.
Do not mix with other brake fluids!
Not suitable for vehicles that require a mineral brake fluid (LHM). Observe manufacturer's specifications. Not recommended if the components used are made of magnesium or are alloys with a high magnesium content.
FOLLOW VEHICLE MANUFACTURERS RECOMMENDATIONS WHEN ADDING BRAKE FLUID KEEP BRAKE FLUID CLEAN AND DRY. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs.
STORE BRAKE FLUID ONLY IN ITS ORIGINAL CONTAINER. KEEP CONTAINER CLEAN AND TIGHTLY CLOSED TO PREVENT ADSORPTION OF WATER. CAUTION! DO NOT REFILL CONTAINER AND DO NOT USE FOR OTHER LIQUIDS.
Dispose of used brake fluid responsibly (EU waste code 160113)
Brake fluid damages paint work –if spilt wash off immediately with plenty of water.
Characteristics
- Optimum ABS properties
- Chemical stability.
- Highest lubricating power
- Neutral behaviour towards brake parts
- Low viscosity even at low temperatures
- Can be mixed with all braking fluids of the same specification.
| Parameter | Unit | Value | Audit | |
|---|---|---|---|---|
| FMVSS 116 specifications (DOT) | DOT-4 |
DOT-4
|
||
| Brand | RAVENOL |
RAVENOL
|
||
| Type | Synthetic |
Synthetic
|
||
| specification | DOT 4, DOT 5.1, SAE J 1703, SAE J 1704 |
DOT 4, DOT 5.1, SAE J 1703, SAE J 1704
|
||
| Density at 20 °C | g/cm³ | 1078 | EN ISO 12185 |
1078
g/cm³
EN ISO 12185
|
| Color | Yellow | visual |
Yellow
visual
|
|
| Viscosity at 100 °C | mPa*s | 2.59 | ASTM D445 |
2.59
mPa*s
ASTM D445
|
| Viscosity at -40 °C | cSt | 1495 | ASTM D445 |
1495
cSt
ASTM D445
|
| Boiling point | °C | 328 — | FMVSS 116 |
328 —
°C
FMVSS 116
|
| Wet Equilibrium Reflux Boiling Point | °C | 204 | FMVSS 116 |
204
°C
FMVSS 116
|
| High Temperature Stability | °C | -1 | FMVSS 116 |
-1
°C
FMVSS 116
|
| Chemical Stability | °C | 1 | FMVSS 116 |
1
°C
FMVSS 116
|
| Evaporation | %w/w | 50 | FMVSS 116 |
50
%w/w
FMVSS 116
|
| Fluidity & Appearance at -40 °C | i.O., 4s | FMVSS 116 |
i.O., 4s
FMVSS 116
|
|
| Fluidity & Appearance at -50 °C | i.O., 7s | FMVSS 116 |
i.O., 7s
FMVSS 116
|
|
| Water Tolerance at -40 °C | transparent, 5s | FMVSS 116 |
transparent, 5s
FMVSS 116
|
|
| Water Tolerance at +60 °C | Transparent | FMVSS 116 |
Transparent
FMVSS 116
|
|
| Compatibility at -40 °C | Transparent | FMVSS 116 |
Transparent
FMVSS 116
|
|
| Compatibility at +60 °C | Transparent | FMVSS 116 |
Transparent
FMVSS 116
|
|
| Water content | % | — 0.2 | DIN 51777-1 |
— 0.2
%
DIN 51777-1
|
| Tinned Iron | Δ mg/cm² | 0.03 | FMVSS 116 |
0.03
Δ mg/cm²
FMVSS 116
|
| Steel | mg/cm² | 0.01 | FMVSS 116 |
0.01
mg/cm²
FMVSS 116
|
| Aluminium | mg/cm² | -0.01 | FMVSS 116 |
-0.01
mg/cm²
FMVSS 116
|
| Cast Iron | Δ mg/cm² | -0,10 | FMVSS 116 |
-0,10
Δ mg/cm²
FMVSS 116
|
| Brass | mg/cm² | -0.04 | FMVSS 116 |
-0.04
mg/cm²
FMVSS 116
|
| Copper | mg/cm² | -0.05 | FMVSS 116 |
-0.05
mg/cm²
FMVSS 116
|
| Sediment | % | — 0.05 | FMVSS 116 |
— 0.05
%
FMVSS 116
|
| pH - value | 7.51 | FMVSS 116 |
7.51
FMVSS 116
|
|
| Rubber Diameter Change | 0.03 | FMVSS 116 |
0.03
FMVSS 116
|
|
| Hardness Change | °IRHD | -4 | FMVSS 116 |
-4
°IRHD
FMVSS 116
|
| Appearance | i.O. | FMVSS 116 |
i.O.
FMVSS 116
|
|
| SBR at 70 °C | mm | 0.76 | FMVSS 116 |
0.76
mm
FMVSS 116
|
| SBR at 120 °C | mm | 1.05 | FMVSS 116 |
1.05
mm
FMVSS 116
|
| EPDM at 70 °C (as required by SAE J1703) | IRHD | -1 | FMVSS 116 |
-1
IRHD
FMVSS 116
|
| EPDM at 120 °C | IRHD | -2.5 | FMVSS 116 |
-2.5
IRHD
FMVSS 116
|
| Approvals | DOT 4, DOT 5.1, SAE J 1703, SAE J 1704 |
DOT 4, DOT 5.1, SAE J 1703, SAE J 1704
|
