Oil for PGO Ligero (RS) Ligero (RS) 100 PA-100 (year of issue from 0 date to present). Motor, automatic transmission oil, transmission, antifreeze, gur fluid, brake fluid

Search by VIN, brand, model, type of motorcycle or unit name, by article of any oil:

Oil for PGO - Ligero (RS) - 100 PA-100

PGO Ligero (RS) 100 PA-100 - Engine oil, automatic transmission, transmission oil, antifreeze, brake fluid, power steering fluid (power steering) and other fluids.

Add to Garage

Engine

Liquid volume (basic): 0.9 L

Motobike 4-T Mineral 15W-40

For motorcycles

RAVENOL Motobike 4-T Mineral 15W-40 has an excellent lubricating film adhesive capacity and a very good shear stability as well as an excellent cleaning power and a high aging resistance.

show details

SAE: 15W-40

API: SN

Equivalents OEM:
BMW 81229407295, BMW 81229407296, BMW 81229407414, Honda 0823299951HA, Honda 0823299952HA, Honda 0823299952HA

Usage mode: normal

Replacement via, KM: 1000

Replacement every 300 KM or 1 MONTH.

Available packaging
Full description
Product parameters

Volume:
1 L

vendor code:
1173121-001

Code:
4014835731318

Volume:
4 L

vendor code:
1173121-004

Code:
4014835731394

Volume:
20 L

vendor code:
1173121-020

Volume:
20 L, ecobox

vendor code:
1173121-B20

Code:
4014835783928

Volume:
60 L

vendor code:
1173121-060

RAVENOL Motobike 4-T Mineral 15W-40 has an excellent lubricating film adhesive capacity and a very good shear stability as well as an excellent cleaning power and a high aging resistance.

Application Note

RAVENOL Motobike 4-T Mineral 15W-40 is suitable as an engine oil for all motorbikes in case the specification SAE 15W-40 is requested.

Characteristics

a very good shear stability
very good cold start characteristics
a high oxidation stability
prevention of black sludge accumulation
an excellent viscosity temperature behaviour
suitable for catalysts
convincing detergent and dispersant characteristics
high safety reserves even under boundary lubrication conditions

Parameter	Unit	Value	Audit
Engine cycle		4T		4T
Recommendations		Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha		Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
Brand		RAVENOL		RAVENOL
SAE		15W-40		15W-40
Type		Mineral		Mineral
API		SN		SN
JASO		MA2		MA2
Suitable for		Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha		Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
Density at 20 °C	g/cm³	863.6	EN ISO 12185	863.6 g/cm³ EN ISO 12185
Color		tan	visual	tan visual
Viscosity at 100 °C	mm²/s	14.28	DIN 51562-1	14.28 mm²/s DIN 51562-1
Viscosity at 40 °C	mm²/s	107.5	DIN 51562-1	107.5 mm²/s DIN 51562-1
Viscosity Index VI		135	DIN ISO 2909	135 DIN ISO 2909
CCS Viscosity at -20 °C	mPa*s	6124	ASTM D5293	6124 mPa*s ASTM D5293
Pourpoint	°C	-30	DIN ISO 3016	-30 °C DIN ISO 3016
Noack Volatility	%	6.8	ASTM D5800	6.8 % ASTM D5800
Flashpoint	°C	256	DIN EN ISO 2592	256 °C DIN EN ISO 2592
tbn	mgKOH/g	8	ASTM D2896	8 mgKOH/g ASTM D2896
Sulphated Ash	%wt.	1.06	DIN 51575	1.06 %wt. DIN 51575

Motobike 4-T Mineral 20W-50

For motorcycles

RAVENOL Motobike 4-T Mineral 20W-50 has an excellent lubricating film adhesive capacity and a very good shear stability as well as an excellent cleaning power and a high aging resistance.

show details

SAE: 20W-50

API: SN

Equivalents OEM:
Alpine 0121481, Alpine 0121483, Alpine 121481, Alpine 121481, BMW 81229407685, BMW 83219407770, GM 19375074, GM 19375075, Honda 08C35A25W0M, Yamaha 90793AR40300, Yamaha ACCY4M204012, Yamaha ACCY40204012

Usage mode: normal

Replacement via, KM: 1000

Replacement every 300 KM or 1 MONTH.

Available packaging
Full description
Product parameters

Volume:
1 L

vendor code:
1173122-001

Code:
4014835731417

Volume:
4 L

vendor code:
1173122-004

Code:
4014835731493

Volume:
20 L

vendor code:
1173122-020

Volume:
20 L, ecobox

vendor code:
1173122-B20

Code:
4014835784024

Volume:
60 L

vendor code:
1173122-060

Volume:
208 L

vendor code:
1173122-208

Volume:
1000 L

vendor code:
1173122-700

Volume:
10 L

vendor code:
1173122-010

Code:
4014835888630

RAVENOL Motobike 4-T Mineral 20W-50 has an excellent lubricating film adhesive capacity and a very good shear stability as well as an excellent cleaning power and a high aging resistance.

Application Note

RAVENOL Motobike 4-T Mineral 20W-50 is suitable as an engine oil for all motorbikes in case the specification SAE 20W-50 JASO MA/MA2 is requested.

Characteristics

a very good shear stability
very good cold start characteristics
a high oxidation stability
prevention of black sludge accumulation
an excellent viscosity temperature behaviour
suitable for catalysts
convincing detergent and dispersant characteristics
high safety reserves even under boundary lubrication conditions

Parameter	Unit	Value	Audit
Engine cycle		4T		4T
Recommendations		Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha		Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
Brand		RAVENOL		RAVENOL
SAE		20W-50		20W-50
Type		Mineral		Mineral
API		SN		SN
JASO		MA2		MA2
JASO T904 DFI		1.89	JASO T904	1.89 JASO T904
JASO T904 SFI		1.65	JASO T904	1.65 JASO T904
JASO T904 STI		1.86	JASO T904	1.86 JASO T904
Suitable for		Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha		Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
Density at 20 °C	g/cm³	873.2	EN ISO 12185	873.2 g/cm³ EN ISO 12185
Color		Light brown	visual	Light brown visual
Viscosity at 100 °C	mm²/s	18	DIN 51562-1	18 mm²/s DIN 51562-1
Viscosity at 40 °C	mm²/s	161.8	DIN 51562-1	161.8 mm²/s DIN 51562-1
Viscosity Index VI		123	DIN ISO 2909	123 DIN ISO 2909
HTHS Viscosity at 150 °C	mPa*s	5.15	ASTM D5481	5.15 mPa*s ASTM D5481
CCS Viscosity at -15 °C	mPa*s	8300	ASTM D5293	8300 mPa*s ASTM D5293
Pourpoint	°C	-39	DIN ISO 3016	-39 °C DIN ISO 3016
Noack Volatility	%	2.8	ASTM D5800	2.8 % ASTM D5800
Flashpoint	°C	266	DIN EN ISO 2592	266 °C DIN EN ISO 2592
tbn	mgKOH/g	7.6	ASTM D2896	7.6 mgKOH/g ASTM D2896
Sulphated Ash	%wt.	0.85	DIN 51575	0.85 %wt. DIN 51575

Professional Engine Cleaner

Additive

RAVENOL Professional Engine Cleaner can also be used in motorcycles.

show details

Equivalents OEM:
Ford MF95700400X, Ford MP15700400AB, Mitsubishi MZ100723EX, Polaris 502082, Polaris 502528, Polaris 2881413, Subaru SOA635046, Subaru SOA635046, Suzuki 990LM07590

Usage mode: normal

Replacement via, KM: 1000

Replacement every 300 KM or 1 MONTH.

Available packaging
Full description
Product parameters

Volume:
0.3 L

vendor code:
1390321-300

Code:
4014835862869

RAVENOL Professional Engine Cleaner can also be used in motorcycles.

RAVENOL Professional Engine Cleaner effectively breaks down dirt accumulation and sludge deposits in the engine compartment using intensive-cleaning tensides and removes these effectively when draining used oil.

RAVENOL Professional Engine Cleaner cleans and rinses the entire engine system.

Application Note

RAVENOL Professional Engine Cleaner is added to the warm motor oil.

Area of application:

-If black sludge is suspected

-In the event of hydraulic tappets rattling

-In the event of delayed oil change

-For soiled engines or used oil

-Preventively at every oil change to avoid contamination of the engine

-Also suitable for oldtimers

Dosage: 300 ml RAVENOL Professional Engine Cleaner are sufficient for one application of approx. 5L Oil, regardless of manufacturer and motor size.

Application: Add the contents to the warm motor oil before changing oil. Do not go below the minimum oil level. For maximum effect, allow to run for up to 10 minutes. Afterwards, immediately replace oil and filter.

RAVENOL Professional Engine Cleaner is tried and tested for aggregates with motor oils based on mineraloil and synthetic oil.

Characteristics

Long-term effectiveness and clean fresh oil
Remedy for soiled engines
Protection against compression loss in the area of the piston rings
Leads to better exhaust emissions and increases the performance of the engine

Parameter	Unit	Value	Audit
Color		Light brown	visual	Light brown visual
Flashpoint (PM)	°C	62	DIN ISO 3679	62 °C DIN ISO 3679
Density at 20 °C		805	EN ISO 12185	805 EN ISO 12185
Viscosity at 40 °C	mm²/s	7	DIN EN ISO 3104	7 mm²/s DIN EN ISO 3104
Brand		RAVENOL		RAVENOL

End fork

Liquid volume (basic): 70 G

Fork Oil Heavy 15W

For motorsports

RAVENOL FORKOIL Heavy 15W is especially characterised by a high and stable viscosity index as well as a solid corrosion protection. Efficient additives offer even under extreme loads an excellent corrosion protection. The behaviour against sealing materials is neutral.

show details

SAE: 15W

Equivalents OEM:
Honda 08CUSM99SS19, Yamalube ACCFORKF0015, Yamalube YMD650490140, Yamalube YMD650490141, Yamalube YMD650490142, Yamalube YMD650490142, Yamalube YMD650490144

Available packaging
Full description
Product parameters

Volume:
1 L

vendor code:
1182105-001

Code:
4014835731912

Volume:
4 L

vendor code:
1182105-004

Volume:
20 L

vendor code:
1182105-020

Volume:
20 L, ecobox

vendor code:
1182105-B20

RAVENOL FORKOIL Heavy 15W is especially characterised by a high and stable viscosity index as well as a solid corrosion protection. Efficient additives offer even under extreme loads an excellent corrosion protection. The behaviour against sealing materials is neutral.

Application Note

RAVENOL FORKOIL Heavy 15W was developed for the use in all chassis components of two-wheeler vehicles and offers good power characteristics. In order to obtain the optimum viscosity for the vehicle and operating condition the mineral fork oils are miscible among each other.

Characteristics

good damping characteristics at all temperatures
a high and stable viscosity index
an excellent protection against corrosion, therefore a longer endurance of the fork components
as far as possible protection against corrosion of the inside components
a very good air and water separation behaviour to prevent foam formation
neutral behaviour against sealing made of plastics
a very low pour point

Parameter	Unit	Value	Audit
Recommendations		Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha		Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
Brand		RAVENOL		RAVENOL
SAE		15W		15W
Type		Mineral		Mineral
Suitable for		Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha		Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
Density at 20 °C	g/cm³	855	EN ISO 12185	855 g/cm³ EN ISO 12185
Color		Yellow	visual	Yellow visual
Viscosity at 100 °C	mm²/s	7.9	DIN 51562-1	7.9 mm²/s DIN 51562-1
Viscosity at 40 °C	mm²/s	45.6	DIN 51562-1	45.6 mm²/s DIN 51562-1
Viscosity Index VI		146	DIN ISO 2909	146 DIN ISO 2909
Pourpoint	°C	-39	DIN ISO 3016	-39 °C DIN ISO 3016
Flashpoint	°C	228	DIN EN ISO 2592	228 °C DIN EN ISO 2592

Hydraulic brake system

DOT 4

For brake system

Because of the special formulation of RAVENOL DOT 4 the international specifications SAE J 1704, ISO 4925 and the safety regulations FMVSS 116 DOT 3 and DOT 4 from the United States of America are exceeded.

show details

Available packaging
Full description
Product parameters

Volume:
250 ml

vendor code:
1350601-250

Code:
4014835692121

Volume:
500 ml

vendor code:
1350601-500

Code:
4014835692152

Volume:
1 L

vendor code:
1350601-001

Code:
4014835692114

Volume:
20 L

vendor code:
1350601-020

DOT 4

Because of the special formulation of RAVENOL DOT 4 the international specifications SAE J 1704, ISO 4925 and the safety regulations FMVSS 116 DOT 3 and DOT 4 from the United States of America are exceeded.

Application Note

RAVENOL DOT can be used in all vehicles for which the DOT 4 specification for brake fluids is required. It is suitable for all hydraulic brake systems with synthetic fluids.

RAVENOL DOT is miscible with all known brake fluids of the same specification. To use the high performance level of RAVENOL DOT , a complete change of the brake fluid is recommended.

RAVENOL DOT is not suitable for vehicles with mineral oil systems (e.g. certain Citroën models).

FOLLOW VEHICLE MANUFACTURERS RECOMMENDATIONS WHEN ADDING BRAKE FLUID KEEP BRAKE FLUID CLEAN AND DRY. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs.

STORE BRAKE FLUID ONLY IN ITS ORIGINAL CONTAINER. KEEP CONTAINER CLEAN AND TIGHTLY CLOSED TO PREVENT ADSORPTION OF WATER. CAUTION! DO NOT REFILL CONTAINER AND DO NOT USE FOR OTHER LIQUIDS.

Dispose of used brake fluid responsibly (EU waste code 160113).

Brake fluid damages paint work –if spilt wash off immediately with plenty of water.

Characteristics

optimum ABS characteristics
chemical stability
best lubrication efficiency
neutral behaviour regarding brake parts
low viscosity at low temperatures
miscible with all brake fluids of the same specifications

Parameter	Unit	Value	Audit
FMVSS 116 specifications (DOT)		DOT-4		DOT-4
Brand		RAVENOL		RAVENOL
Type		Synthetic		Synthetic
specification		DOT 4, ISO 4925 Class 4, SAE J 1704		DOT 4, ISO 4925 Class 4, SAE J 1704
Density at 20 °C	g/cm³	1052	EN ISO 12185	1052 g/cm³ EN ISO 12185
Color		light yellow	visual	light yellow visual
Viscosity at 100 °C	mPa*s	2.41	ASTM D445	2.41 mPa*s ASTM D445
Viscosity at -40 °C	cSt	1340	ASTM D445	1340 cSt ASTM D445
Boiling point	°C	271	FMVSS 116	271 °C FMVSS 116
Wet Equilibrium Reflux Boiling Point	°C	169	FMVSS 116	169 °C FMVSS 116
High Temperature Stability	°C	-1	FMVSS 116	-1 °C FMVSS 116
Chemical Stability	°C	1	FMVSS 116	1 °C FMVSS 116
Evaporation	%w/w	61	FMVSS 116	61 %w/w FMVSS 116
Fluidity & Appearance at -40 °C		i.O., 4s	FMVSS 116	i.O., 4s FMVSS 116
Fluidity & Appearance at -50 °C		i.O., 8s	FMVSS 116	i.O., 8s FMVSS 116
Water Tolerance at -40 °C		transparent, 3s	FMVSS 116	transparent, 3s FMVSS 116
Water Tolerance at +60 °C		Transparent	FMVSS 116	Transparent FMVSS 116
Compatibility at -40 °C		Transparent	FMVSS 116	Transparent FMVSS 116
Compatibility at +60 °C		Transparent	FMVSS 116	Transparent FMVSS 116
Water content	%	— 0.2	DIN 51777-1	— 0.2 % DIN 51777-1
Tinned Iron	Δ mg/cm²	0.04	FMVSS 116	0.04 Δ mg/cm² FMVSS 116
Steel	mg/cm²	-0.01	FMVSS 116	-0.01 mg/cm² FMVSS 116
Aluminium	mg/cm²	0.02	FMVSS 116	0.02 mg/cm² FMVSS 116
Cast Iron	Δ mg/cm²	-0,03	FMVSS 116	-0,03 Δ mg/cm² FMVSS 116
Brass	mg/cm²	-0.08	FMVSS 116	-0.08 mg/cm² FMVSS 116
Copper	mg/cm²	-0.05	FMVSS 116	-0.05 mg/cm² FMVSS 116
Zinc	mg/cm²	0.01	FMVSS 116	0.01 mg/cm² FMVSS 116
Sediment	%	— 0.05	FMVSS 116	— 0.05 % FMVSS 116
pH - value		8.2	FMVSS 116	8.2 FMVSS 116
Rubber Diameter Change		0.16	FMVSS 116	0.16 FMVSS 116
Hardness Change	°IRHD	-4	FMVSS 116	-4 °IRHD FMVSS 116
Appearance		i.O.	FMVSS 116	i.O. FMVSS 116
SBR at 70 °C	mm	0.56	FMVSS 116	0.56 mm FMVSS 116
SBR at 120 °C	mm	0.73	FMVSS 116	0.73 mm FMVSS 116
EPDM at 70 °C (as required by SAE J1703)	IRHD	-2	FMVSS 116	-2 IRHD FMVSS 116
EPDM at 120 °C	IRHD	-2	FMVSS 116	-2 IRHD FMVSS 116
Natural at 70 °C (as required by ISO 4925)	mm	0.38	FMVSS 116	0.38 mm FMVSS 116
Approvals		DOT 4, ISO 4925 Class 4, SAE J 1704		DOT 4, ISO 4925 Class 4, SAE J 1704