Oil for Sinnis Matrix II Matrix II 125 QM125T-10H (year of issue from 2008 date to present). Motor, automatic transmission oil, transmission, antifreeze, gur fluid, brake fluid

Search by VIN, brand, model, type of motorcycle or unit name, by article of any oil:

Oil for Sinnis - Matrix II - 125 QM125T-10H

Sinnis Matrix II 125 QM125T-10H, year of issue from 2008 - Engine oil, automatic transmission, transmission oil, antifreeze, brake fluid, power steering fluid (power steering) and other fluids.

Add to Garage

Engine

Liquid volume (basic): 0.9 L

Motobike 4-T Ester 10W-40

For motorcycles

With RAVENOL Motobike 4-T Ester SAE 10W-40 a solid and high loadable engine oil was developed. The excellent cold start behaviour provides an optimum lubrication safety during the cold run phase.

show details

SAE: 10W-40

API: SN

Available packaging
Full description
Product parameters

Volume:
1 L

vendor code:
1172112-001

Code:
4014835731110

Volume:
4 L

vendor code:
1172112-004

Code:
4014835731196

Volume:
20 L

vendor code:
1172112-020

Volume:
20 L, ecobox

vendor code:
1172112-B20

Code:
4014835783423

Volume:
60 L

vendor code:
1172112-060

Volume:
60 L, print

vendor code:
1172112-D60

Code:
4014835783430

Volume:
208 L

vendor code:
1172112-208

Volume:
208 L, print

vendor code:
1172112-D28

Volume:
1000 L

vendor code:
1172112-700

Volume:
10 L

vendor code:
1172112-010

Code:
4014835888579

With RAVENOL Motobike 4-T Ester SAE 10W-40 a solid and high loadable engine oil was developed. The excellent cold start behaviour provides an optimum lubrication safety during the cold run phase.

RAVENOL Motobike 4-T Ester SAE 10W-40 fulfils the high tech demands of the latest powerful engine generation.

Application Note

RAVENOL Motobike 4-T Ester SAE 10W-40 is suitable as a high performance low friction engine oil for all motorbikes in case the specification SAE 10W-40 JASO MA/MA2 is requested.

Characteristics

a quick lubrication of the engine
a low evaporation tendency, therefore a lower oil consumption
safety against sludge accumulation, cokings and corrosion even under unfavourable operating conditions
guarantee of the function of the hydro tappets at all temperatures
no oil limited deposits in combustion chambers, at the piston ring and valves
unchanged viscosity during the whole oil change interval, a high viscosity index
neutral against sealing materials

Parameter	Unit	Value	Audit
Engine cycle		4T		4T
Recommendations		Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha		Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
Brand		RAVENOL		RAVENOL
SAE		10W-40		10W-40
Type		Synthetic		Synthetic
API		SN		SN
JASO		MA2		MA2
JASO T904 DFI		1.98	JASO T904	1.98 JASO T904
JASO T904 SFI		1.69	JASO T904	1.69 JASO T904
JASO T904 STI		1.94	JASO T904	1.94 JASO T904
Suitable for		Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha		Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
Density at 20 °C	g/cm³	850	EN ISO 12185	850 g/cm³ EN ISO 12185
Color		Brown	visual	Brown visual
Viscosity at 100 °C	mm²/s	14.16	DIN 51562-1	14.16 mm²/s DIN 51562-1
Viscosity at 40 °C	mm²/s	94.73	DIN 51562-1	94.73 mm²/s DIN 51562-1
Viscosity Index VI		154	DIN ISO 2909	154 DIN ISO 2909
HTHS Viscosity at 150 °C	mPa*s	4.22	ASTM D5481	4.22 mPa*s ASTM D5481
CCS Viscosity at -25 °C	mPa*s	5900	ASTM D5293	5900 mPa*s ASTM D5293
Low Temp. Pumping viscosity (MRV) at -30 °C	mPa*s	21.300	ASTM D4684	21.300 mPa*s ASTM D4684
Pourpoint	°C	-39	DIN ISO 3016	-39 °C DIN ISO 3016
Noack Volatility	%	3.6	ASTM D5800	3.6 % ASTM D5800
Flashpoint	°C	254	DIN EN ISO 2592	254 °C DIN EN ISO 2592
tbn	mgKOH/g	7.8	ASTM D2896	7.8 mgKOH/g ASTM D2896
Sulphated Ash	%wt.	0.85	DIN 51575	0.85 %wt. DIN 51575

Motobike 4-T Mineral 15W-40

For motorcycles

RAVENOL Motobike 4-T Mineral 15W-40 has an excellent lubricating film adhesive capacity and a very good shear stability as well as an excellent cleaning power and a high aging resistance.

show details

SAE: 15W-40

API: SN

Equivalents OEM:
BMW 81229407295, BMW 81229407296, BMW 81229407414, Honda 0823299951HA, Honda 0823299952HA, Honda 0823299952HA

Available packaging
Full description
Product parameters

Volume:
1 L

vendor code:
1173121-001

Code:
4014835731318

Volume:
4 L

vendor code:
1173121-004

Code:
4014835731394

Volume:
20 L

vendor code:
1173121-020

Volume:
20 L, ecobox

vendor code:
1173121-B20

Code:
4014835783928

Volume:
60 L

vendor code:
1173121-060

RAVENOL Motobike 4-T Mineral 15W-40 has an excellent lubricating film adhesive capacity and a very good shear stability as well as an excellent cleaning power and a high aging resistance.

Application Note

RAVENOL Motobike 4-T Mineral 15W-40 is suitable as an engine oil for all motorbikes in case the specification SAE 15W-40 is requested.

Characteristics

a very good shear stability
very good cold start characteristics
a high oxidation stability
prevention of black sludge accumulation
an excellent viscosity temperature behaviour
suitable for catalysts
convincing detergent and dispersant characteristics
high safety reserves even under boundary lubrication conditions

Parameter	Unit	Value	Audit
Engine cycle		4T		4T
Recommendations		Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha		Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
Brand		RAVENOL		RAVENOL
SAE		15W-40		15W-40
Type		Mineral		Mineral
API		SN		SN
JASO		MA2		MA2
Suitable for		Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha		Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
Density at 20 °C	g/cm³	863.6	EN ISO 12185	863.6 g/cm³ EN ISO 12185
Color		tan	visual	tan visual
Viscosity at 100 °C	mm²/s	14.28	DIN 51562-1	14.28 mm²/s DIN 51562-1
Viscosity at 40 °C	mm²/s	107.5	DIN 51562-1	107.5 mm²/s DIN 51562-1
Viscosity Index VI		135	DIN ISO 2909	135 DIN ISO 2909
CCS Viscosity at -20 °C	mPa*s	6124	ASTM D5293	6124 mPa*s ASTM D5293
Pourpoint	°C	-30	DIN ISO 3016	-30 °C DIN ISO 3016
Noack Volatility	%	6.8	ASTM D5800	6.8 % ASTM D5800
Flashpoint	°C	256	DIN EN ISO 2592	256 °C DIN EN ISO 2592
tbn	mgKOH/g	8	ASTM D2896	8 mgKOH/g ASTM D2896
Sulphated Ash	%wt.	1.06	DIN 51575	1.06 %wt. DIN 51575

Motobike 4-T Mineral 20W-50

For motorcycles

RAVENOL Motobike 4-T Mineral 20W-50 has an excellent lubricating film adhesive capacity and a very good shear stability as well as an excellent cleaning power and a high aging resistance.

show details

SAE: 20W-50

API: SN

Equivalents OEM:
Alpine 0121481, Alpine 0121483, Alpine 121481, Alpine 121481, BMW 81229407685, BMW 83219407770, GM 19375074, GM 19375075, Honda 08C35A25W0M, Yamaha 90793AR40300, Yamaha ACCY4M204012, Yamaha ACCY40204012

Available packaging
Full description
Product parameters

Volume:
1 L

vendor code:
1173122-001

Code:
4014835731417

Volume:
4 L

vendor code:
1173122-004

Code:
4014835731493

Volume:
20 L

vendor code:
1173122-020

Volume:
20 L, ecobox

vendor code:
1173122-B20

Code:
4014835784024

Volume:
60 L

vendor code:
1173122-060

Volume:
208 L

vendor code:
1173122-208

Volume:
1000 L

vendor code:
1173122-700

Volume:
10 L

vendor code:
1173122-010

Code:
4014835888630

RAVENOL Motobike 4-T Mineral 20W-50 has an excellent lubricating film adhesive capacity and a very good shear stability as well as an excellent cleaning power and a high aging resistance.

Application Note

RAVENOL Motobike 4-T Mineral 20W-50 is suitable as an engine oil for all motorbikes in case the specification SAE 20W-50 JASO MA/MA2 is requested.

Characteristics

a very good shear stability
very good cold start characteristics
a high oxidation stability
prevention of black sludge accumulation
an excellent viscosity temperature behaviour
suitable for catalysts
convincing detergent and dispersant characteristics
high safety reserves even under boundary lubrication conditions

Parameter	Unit	Value	Audit
Engine cycle		4T		4T
Recommendations		Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha		Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
Brand		RAVENOL		RAVENOL
SAE		20W-50		20W-50
Type		Mineral		Mineral
API		SN		SN
JASO		MA2		MA2
JASO T904 DFI		1.89	JASO T904	1.89 JASO T904
JASO T904 SFI		1.65	JASO T904	1.65 JASO T904
JASO T904 STI		1.86	JASO T904	1.86 JASO T904
Suitable for		Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha		Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
Density at 20 °C	g/cm³	873.2	EN ISO 12185	873.2 g/cm³ EN ISO 12185
Color		Light brown	visual	Light brown visual
Viscosity at 100 °C	mm²/s	18	DIN 51562-1	18 mm²/s DIN 51562-1
Viscosity at 40 °C	mm²/s	161.8	DIN 51562-1	161.8 mm²/s DIN 51562-1
Viscosity Index VI		123	DIN ISO 2909	123 DIN ISO 2909
HTHS Viscosity at 150 °C	mPa*s	5.15	ASTM D5481	5.15 mPa*s ASTM D5481
CCS Viscosity at -15 °C	mPa*s	8300	ASTM D5293	8300 mPa*s ASTM D5293
Pourpoint	°C	-39	DIN ISO 3016	-39 °C DIN ISO 3016
Noack Volatility	%	2.8	ASTM D5800	2.8 % ASTM D5800
Flashpoint	°C	266	DIN EN ISO 2592	266 °C DIN EN ISO 2592
tbn	mgKOH/g	7.6	ASTM D2896	7.6 mgKOH/g ASTM D2896
Sulphated Ash	%wt.	0.85	DIN 51575	0.85 %wt. DIN 51575

Professional Engine Cleaner

Additive

RAVENOL Professional Engine Cleaner can also be used in motorcycles.

show details

Equivalents OEM:
Ford MF95700400X, Ford MP15700400AB, Mitsubishi MZ100723EX, Polaris 502082, Polaris 502528, Polaris 2881413, Subaru SOA635046, Subaru SOA635046, Suzuki 990LM07590

Available packaging
Full description
Product parameters

Volume:
0.3 L

vendor code:
1390321-300

Code:
4014835862869

RAVENOL Professional Engine Cleaner can also be used in motorcycles.

RAVENOL Professional Engine Cleaner effectively breaks down dirt accumulation and sludge deposits in the engine compartment using intensive-cleaning tensides and removes these effectively when draining used oil.

RAVENOL Professional Engine Cleaner cleans and rinses the entire engine system.

Application Note

RAVENOL Professional Engine Cleaner is added to the warm motor oil.

Area of application:

-If black sludge is suspected

-In the event of hydraulic tappets rattling

-In the event of delayed oil change

-For soiled engines or used oil

-Preventively at every oil change to avoid contamination of the engine

-Also suitable for oldtimers

Dosage: 300 ml RAVENOL Professional Engine Cleaner are sufficient for one application of approx. 5L Oil, regardless of manufacturer and motor size.

Application: Add the contents to the warm motor oil before changing oil. Do not go below the minimum oil level. For maximum effect, allow to run for up to 10 minutes. Afterwards, immediately replace oil and filter.

RAVENOL Professional Engine Cleaner is tried and tested for aggregates with motor oils based on mineraloil and synthetic oil.

Characteristics

Long-term effectiveness and clean fresh oil
Remedy for soiled engines
Protection against compression loss in the area of the piston rings
Leads to better exhaust emissions and increases the performance of the engine

Parameter	Unit	Value	Audit
Color		Light brown	visual	Light brown visual
Flashpoint (PM)	°C	62	DIN ISO 3679	62 °C DIN ISO 3679
Density at 20 °C		805	EN ISO 12185	805 EN ISO 12185
Viscosity at 40 °C	mm²/s	7	DIN EN ISO 3104	7 mm²/s DIN EN ISO 3104
Brand		RAVENOL		RAVENOL

Final Reduction

Liquid volume (basic): 0.1 L

VSG 75W-90

For transmission

RAVENOL VSG SAE 75W-90 is designed based on high-quality synthetic base oils with a special additive treatment and inhibition ensuring trouble-free transmission function.

Compliance with the requirements:
BMW MTF-LT-4, BMW OSP, BMW SAF-XO, BOT 130 M, BOT 328, BOT 720, DAF LKW, DTFR 12B140 (MB 235.8), DTFR 13B110 (MB 235.11), Ford WSD-M2C 200-C, MAN 342 Type S1, MB 235.8, MB 235.9, MB 235.11, MB 235.21, MB 235.72, MIL-L-2105 D, Renault LKW, Scania STO 1:0, VW G 052 145, VW G 052 539, VW G 052 911, ZF TE-ML 12B, ZF TE-ML 16F, ZF TE-ML 17B

show details

SAE: 75W-90

API: GL-4, GL-5

Available packaging
Full description
Product parameters

Volume:
1 L

vendor code:
1221101-001

Code:
4014835733916

Volume:
4 L

vendor code:
1221101-004

Code:
4014835733992

Volume:
10 L

vendor code:
1221101-010

Code:
4014835733947

Volume:
20 L

vendor code:
1221101-020

Code:
4014835733923

Volume:
20 L, ecobox

vendor code:
1221101-B20

Code:
4014835846654

Volume:
60 L

vendor code:
1221101-060

Code:
2200000083081

Volume:
60 L, print

vendor code:
1221101-D60

Code:
4014835733930

Volume:
208 L

vendor code:
1221101-208

Code:
4014835733985

Volume:
208 L, print

vendor code:
1221101-D28

Code:
4014835733909

Volume:
1000 L

vendor code:
1221101-700

RAVENOL VSG SAE 75W-90 is designed based on high-quality synthetic base oils with a special additive treatment and inhibition ensuring trouble-free transmission function.

Application Note

RAVENOL VSG SAE 75W-90 is excellent for use of highly stressed axle drives.

RAVENOL VSG SAE 75W-90 is suitable for synchronised and non-synchronised manual transmissions, transfer cases and ancillary transmission requiring API GL-5 or GL-4 oil.

RAVENOL VSG SAE 75W-90 is suitable for Ford-transmission IB5, B5, MTX75, GM5, MT285/6, MMT6/6, MT75, R15M-D, R15MX-D, MT82 and Porsche Full-Time Transfer Case with Torsen (PL72T) for Cayenne 92A / 958 Diesel and S Hybrid from 2010 to 2018.

Characteristics

high additive reserves for prolonged oil change intervals according to the manufacturer specifications
excellent cold flow properties
best wear protection and best transmission efficiency
Fuel savings even with short distances in low outdoor temperatures
stable lubricating film even under high stress
extraordinary corrosion protection and good compatibility with non-ferrous metal
high oxidation resistance prevents oil thickening and deposits
outstanding dirt-carrying capacity, i.e. aggregates are clean even after very long oil change intervals
excellent elastomer compatibility to prevent leaks
extreme shearing stability, remains within the clean oil viscosity per SAE class 75W-90 even after very long periods of use
very high protection from rust, corrosion and foaming
extreme low pour point
excellent EP properties
fuel savings

Parameter	Unit	Value	Audit
Recommendations		BMW 83222339223 MTF-LT-4, BMW 83222365987, BMW 83229407768, BMW OSP, BMW SAF-XO, BOT 130 M, BOT 328, BOT 720, DAF LKW (für verlängerte Intervalle), DTFR 12B140 (MB 235.8), DTFR 13B110 (MB 235.11), Ford 1045737, Ford 5021033, Ford WSD-M2C200-C, IVECO, Land Rover TYK500010, MAN 342 S1, MB 235.11, MB 235.21, MB 235.72, MB 235.8, MB 235.9, MIL-L-2105 D, Porsche 000.043.305.04, Porsche 958.341.536.00 (Torsen 2010-2018), Renault LKW, Scania STO 1:0, VOLVO 97312, VOLVO 97315, VOLVO 97319, VW G 052 145 A2, VW G 052 539 A2, VW G 052 911 A2, ZF TE-ML 12B, ZF TE-ML 16F, ZF TE-ML 17B		BMW 83222339223 MTF-LT-4, BMW 83222365987, BMW 83229407768, BMW OSP, BMW SAF-XO, BOT 130 M, BOT 328, BOT 720, DAF LKW (für verlängerte Intervalle), DTFR 12B140 (MB 235.8), DTFR 13B110 (MB 235.11), Ford 1045737, Ford 5021033, Ford WSD-M2C200-C, IVECO, Land Rover TYK500010, MAN 342 S1, MB 235.11, MB 235.21, MB 235.72, MB 235.8, MB 235.9, MIL-L-2105 D, Porsche 000.043.305.04, Porsche 958.341.536.00 (Torsen 2010-2018), Renault LKW, Scania STO 1:0, VOLVO 97312, VOLVO 97315, VOLVO 97319, VW G 052 145 A2, VW G 052 539 A2, VW G 052 911 A2, ZF TE-ML 12B, ZF TE-ML 16F, ZF TE-ML 17B
Brand		RAVENOL		RAVENOL
SAE		75W-90		75W-90
Type		Full synthetic		Full synthetic
API		GL-4, GL-5		GL-4, GL-5
Recomendations		BMW MTF-LT-4, BMW OSP, BMW SAF-XO, BOT 130 M, BOT 328, BOT 720, DAF LKW, DTFR 12B140 (MB 235.8), DTFR 13B110 (MB 235.11), Ford WSD-M2C 200-C, MAN 342 Type S1, MB 235.11, MB 235.21, MB 235.72, MB 235.8, MB 235.9, MIL-L-2105 D, Renault LKW, Scania STO 1:0, VW G 052 145, VW G 052 539, VW G 052 911, ZF TE-ML 12B, ZF TE-ML 16F, ZF TE-ML 17B		BMW MTF-LT-4, BMW OSP, BMW SAF-XO, BOT 130 M, BOT 328, BOT 720, DAF LKW, DTFR 12B140 (MB 235.8), DTFR 13B110 (MB 235.11), Ford WSD-M2C 200-C, MAN 342 Type S1, MB 235.11, MB 235.21, MB 235.72, MB 235.8, MB 235.9, MIL-L-2105 D, Renault LKW, Scania STO 1:0, VW G 052 145, VW G 052 539, VW G 052 911, ZF TE-ML 12B, ZF TE-ML 16F, ZF TE-ML 17B
Suitable for		IVECO		IVECO
Compliant products		BMW 83222339223, BMW 83222365987, BMW 83229407768, Ford 1045737, Ford 5021033, Land Rover TYK500010, Porsche 000.043.305.04, Porsche 958.341.536.00, Volvo 97312, Volvo 97315, Volvo 97319, VW G 052 145, VW G 052 539, VW G 052 911		BMW 83222339223, BMW 83222365987, BMW 83229407768, Ford 1045737, Ford 5021033, Land Rover TYK500010, Porsche 000.043.305.04, Porsche 958.341.536.00, Volvo 97312, Volvo 97315, Volvo 97319, VW G 052 145, VW G 052 539, VW G 052 911
Density at 20 °C	g/cm³	839.8	EN ISO 12185	839.8 g/cm³ EN ISO 12185
Color		Yellow	visual	Yellow visual
Viscosity at 100 °C	mm²/s	16.8	DIN 51562-1	16.8 mm²/s DIN 51562-1
Viscosity at 40 °C	mm²/s	108.8	DIN 51562-1	108.8 mm²/s DIN 51562-1
Viscosity Index VI		168	DIN ISO 2909	168 DIN ISO 2909
Brookfield Viscosity at -40 °C	mPa*s	47.000	ASTM D2983	47.000 mPa*s ASTM D2983
Pourpoint	°C	-57	DIN ISO 3016	-57 °C DIN ISO 3016
Flashpoint	°C	224	DIN EN ISO 2592	224 °C DIN EN ISO 2592
Seq. I at 24 °C	ml/ml	0/0	ASTM D892	0/0 ml/ml ASTM D892
Seq. II at 93,5 °C	ml/ml	0/0	ASTM D892	0/0 ml/ml ASTM D892
Seq. III at 24 °C after 93,5 °C	ml/ml	0/0	ASTM D892	0/0 ml/ml ASTM D892
Copper Strip Test at 121 °C		1a	ASTM D130	1a ASTM D130
Approvals		BMW MTF-LT-4, BMW OSP, BMW SAF-XO, BOT 130 M, BOT 328, BOT 720, DAF LKW, DTFR 12B140 (MB 235.8), DTFR 13B110 (MB 235.11), Ford WSD-M2C 200-C, MAN 342 Type S1, MB 235.11, MB 235.21, MB 235.72, MB 235.8, MB 235.9, MIL-L-2105 D, Renault LKW, Scania STO 1:0, VW G 052 145, VW G 052 539, VW G 052 911, ZF TE-ML 12B, ZF TE-ML 16F, ZF TE-ML 17B		BMW MTF-LT-4, BMW OSP, BMW SAF-XO, BOT 130 M, BOT 328, BOT 720, DAF LKW, DTFR 12B140 (MB 235.8), DTFR 13B110 (MB 235.11), Ford WSD-M2C 200-C, MAN 342 Type S1, MB 235.11, MB 235.21, MB 235.72, MB 235.8, MB 235.9, MIL-L-2105 D, Renault LKW, Scania STO 1:0, VW G 052 145, VW G 052 539, VW G 052 911, ZF TE-ML 12B, ZF TE-ML 16F, ZF TE-ML 17B

Motogear 80W-90 GL-4

For transmission

RAVENOL MOTOGEAR SAE 80W-90 GL-4 ensures a strong oil film for lubrication even under the most extreme dynamic conditions.

show details

SAE: 80W-90

API: GL-4

Available packaging
Full description
Product parameters

Volume:
1 L

vendor code:
1250055-001

Code:
4014835735217

Volume:
4 L

vendor code:
1250055-004

Volume:
20 L, ecobox

vendor code:
1250055-B20

Volume:
208 L

vendor code:
1250055-208

RAVENOL MOTOGEAR SAE 80W-90 GL-4 ensures a strong oil film for lubrication even under the most extreme dynamic conditions.

RAVENOL MOTOGEAR SAE 80W-90 GL-4 reduces friction, prevents wear and corrosion.

Application Note

RAVENOL MOTOGEAR SAE 80W-90 GL-4 is suitable for use in manual transmissions for 2- and 4-stroke motorcycles if oil according to SAE 80W-90 API GL-4 is specified.

Characteristics

Highly adhesive and pressure resistant lubricant films
Excellent oxidation stability
Above-average viscosity-temperature characteristics
Wear-preventing effect
A good air release property, no foaming
Neutral behaviour towards metal and sealing compounds

Parameter	Unit	Value	Audit
SAE		80W-90		80W-90
Brand		RAVENOL		RAVENOL
Type		Mineral		Mineral
API		GL-4		GL-4
Density at 20 °C	g/cm³	879	EN ISO 12185	879 g/cm³ EN ISO 12185
Color		tan	visual	tan visual
Viscosity at 100 °C	mm²/s	14	DIN 51562-1	14 mm²/s DIN 51562-1
Viscosity at 40 °C	mm²/s	126.9	DIN 51562-1	126.9 mm²/s DIN 51562-1
Viscosity Index VI		108	DIN ISO 2909	108 DIN ISO 2909
Brookfield Viscosity at -26 °C	mPa*s	45.600	ASTM D2983	45.600 mPa*s ASTM D2983
Pourpoint	°C	-33	DIN ISO 3016	-33 °C DIN ISO 3016
Flashpoint	°C	244	DIN EN ISO 2592	244 °C DIN EN ISO 2592
Copper Strip Test at 121 °C		1b	ASTM D130	1b ASTM D130